|
|
Enquiry
|
|
Click on image for larger photo
|
Product Code:
30631207
BOSTIK STICKS LIKE SH*T INSTANT ADHESIVE
HIGH-PERFORMANCE, ALL-WEATHER INSTANT
GRAB ADHESIVE
|
|
|
|
|
Please enter a valid quantity |
|
|
|
|
 |
|
|
|
BOSTIK STICKS LIKE SH*T INSTANT ADHESIVE - BONDS IN SECONDS (ALL WEATHER SMP)
NEW TO THE SLS FAMILY, STICKS LIKE SH*T INSTANT GRAB IS A HIGH QUALITY, PROFESSIONAL HYBRID ADHESIVE (SILYL MODIFIED POLYMER - SMP) WITH EXTREMELY HIGH INITAL TACK AND STRENGTH, EVEN ON SMOOTH, NON-ABSORBENT SURFACES
STICKS LIKE SH*T ADHESIVE IS WATER AND SOLVENT FREE, WITH MINIMAL SHRINKAGE AND LOW ODOUR. IT OFFERS OUTSTANDING PERFORMACE ACROSS WIDE VARIETY OF CONSTRUCTION APPLICATIONS AND TYPICALLY DOES NOT REQUIRE A PRIMER
- GRABS ON FIRST CONTACT - NO PROPS, CLAMPS OR HOLDING NEEDED WHILE IT SETS
- STICKS TO ALMOST ANYTHING: STONE, GLASS, METAL, ALUCOBOND, COLORBOND, TIMBER, METALS, RIGID PVC, GRP INSULATION OBARDS,
FOAM POLYSTYRENE AND MORE
- SETS INTO A TOUGH, FLEXIBLE RUBBER THAT HANDLES WEATHER, SUN AND THE ELEMENTS INDOORS OR OUT
- SAFE FOR INDOORS - CERTIFIED LOW - VOC
- ALL WEATHER ADHESIVE
- WATERPROOF
SMART ADVANTAGES:
- HYBRID-BASED ADHESIVE WITH SUPERIOR BOND STRENGTH
- INVIERSAL BONDING FOR INTERIOR AND EXTERIOR USE
- ADHERES PERFECTLY WITHOUT PRIMER ON MOST, EVEN DAMP, SURFACES
- NEUTRAL CURING SYSTEM, ALMOST ODOURLESS
- GOOD RESISTANT TO UV, WEATHER, MOISTURE AND MOULD
- APPEARANCE: WARM WHITE
- FORM: THIXOTROPIC PASTE
- COMPOSITION: MOISTURE CURING SMP
- TEMPERATURE RESISTANCE: -40°C TO +90°C
- APPLICATION TEMPERATURE: +5°C TO +40°C
- APPLICATION RATE: 500-800G/MIN
- SKIN TIME: 10 MINUTES @ +23°/50% RH
- CURE RATE: 2MM/24HRS @ +23°C/50% RH
- FULL CURE: 24HRS, DEPENDING ON BEAD WIDTH, TEMPERATURE AND HUMIDITY
- DENSITY: 1.60G/ML
- SHORE A HARDNESS: 60
- TENSILE STRENGTH: 2.05N/MM²
- ELONGATION AT BREAK: 200%
- COVERAGE PER 3MM DIAMETER BEAD (APPROX.): 44M
- COVERAGE PER 5MM DIAMETER BEAD (APPROX.): 14M
***PRECAUTION***
STICKS LIKE SH*T WILL NOT BOND POLYETHYLENE, POLYPROPYLENE OR TEFLON. IT MUST NOT BE USED TO BOND MIRRORS IF THE MIRROR IS BACKED WITH PLASTIC SAFETY FILM. ***DO NOT BOND MIRRORS TO PAINTED SURFACES AS THE DECORATIVE FINISH WILL BE UNABLE TO SUPPORT THE LOAD***
IT SHOULD NOT BE USED ON SURACES CONTAMINATED BY BITUMEN AND IT IS NOT SUITABLE FOR CONTINUOUSLY DAMP CONIDTIONS. IT IS RECOMMENDED IN OVERHEAD APPLICATIONS TO ALWAYS USE IN CONJUNCTION WITH MECHANICAL FIXINGS. YELLOWING CAN OCCUR IN PREDOMINANTLY DARK CONDITIONS.
|
View Complete Range:
|
WORKSHOP EXTRAS > GASKET GOO / SILICONE*
W.SHOP CONSUMABLES > SILASTIC PRODUCTS
W.SHOP CONSUMABLES > EPOXY REPAIRS - WOOD*
W.SHOP CONSUMABLES > GASKET GOO / SILICONE*
W.SHOP CONSUMABLES > NO MORE NAILS - WOOD*
WOODWORKING TOOLS > NO MORE NAILS - WOOD*
BUILDERS GEAR > NO MORE NAILS - WOOD*
|
|
|
|
|
|
|
|
|