|
|
Enquiry
|
|
Click on image for larger photo
|
Product Code:
LHJA12
AIR HYDRAULIC BOTTLE JACK 12000KG DUAL
OPERATION ADJUSTABLE SCREW SPRING RETURN
MIN LIFT 250MM MAX LIFT 495MM 12KG
|
|
|
|
|
Please enter a valid quantity |
|
|
|
|
 |
|
|
|
12 TONNE AIR HYDRAULIC JACK
- IDEAL FOR CAR AND TRUCK REPAIRS
- MINIMUM HEIGHT: 9 7/8"
- MAXIMUM HEIGHT: 19 1/2" (WITH SCREW EXTENED 3")
- ADJUSTABLE SCREW ROD - TO ADJUST TO SUITABLE OPERATING HEIGHT
- 120 - 200 PSI
- AIR VALVE AND INLET: 1/4" X 18 NPT
- BASE DIMENSIONS: 7 1/2" X 4 3/4"
- INCLUDES 40" AIR HOSE FOR INDUSTRIAL USE IN REPAIRING TRUCKS AND
OTHER HEAVY EQUIPMENT
- TWO OPERATION MODES - AIR OR HYDRAULIC
SAFETY PRECAUTIONS -
WARNING: FAILURE TO HEED THE FOLLOWING WARNINGS CAN RESULT IN PERSONAL INJURY AND/OR EQUIPMENT DAMAGE.THESE WARNINGS CANNOT COVER EVERY SITUATION, SO HAVE SAFETY FOREMOST IN YOUR MIND WHEN SETTING UP A JOB.
- READ, UNDERSTAND AND FOLLOW THE OPERATING INSTURCTIONS AND THE ANSI B30.1 AND ASME PALD-1 SAFETY STANDARDS FOR JACKS. IF THE OPERATOR CANNOT READ ENGLISH, OPERATING INSTURCTIONS AND SAFETY PRECAUTIONS MUST BE READ AND DISCUSSED IN THE OPERATOR'S NATIVE LANGUAGE.
- WEAR EYE PROTECTION THAT MEETS THE REQUIREMENTS OF ANSI Z87.1 AND OSHA.
- INSPECT THE JACK BEFORE EACH USE; DO NOT USE THE JACK IF IT IS DAMAGED, ALTERED, OR IN POOR CONIDITION.
- TO PREVENT TIPPING, SET UP THE JACK ON A HARD, LEVEL SURFACE. SET VEHICLE PARKING BRAKE AND BLOCK TYRES.
- THE LOAD MUST NOT EXCEED THE RATED LIFTING CAPACITY OF THE JACK. LIFT ONLY DEAD WEIGHT.
- CENTER THE LOAD ON THE JACK SADDLE, BECAUSE OFF-CENTRE LOADS CAN DAMAGE SEALS AND CAUSE HYDRAULIC FAILURE.
- USE THE JACK FOR LIFTING PURPOSES ONLY. THIS JACK IS DESIGNED TO LIFT LOADS, NOT SUPPORT LOADS. IMMEDIATELY SUPPORT A LIFTED LOAD WITH JACK STANDS.
- STAY CLEAR OF LIFTED LOADS.
- USE ONLY APPROVED HYDRAULIC FLUID, SUCH AS CHEVRON AW HYDRAULIC OIL MV OR EQUIVALENT.
OPERATING INSTRUCTIONS -
TO RAISE THE JACK, USE NARROW END OF JACK HANDLE TO TIGHTEN RELEASE VALVE CLOCKWISE (CW). INSERT HANDLE INTO SOCKET AND OPERATE PUMP. TO LOWER THE JACK, SLOWLY OPEN THE RELEASE VALVE KNOB BY TURNING IT COUNTERCLOCKWISE (CCW).
|
View Complete Range:
|
WORKSHOP TOOLS > JACKS - AIR BOTTLE JACKS
WORKSHOP TOOLS > JACKS - BOTTLE 10 TONNE & UP
|
|
|
Video:
|
|
|
|
|
|