|
|
Enquiry
|
|
Click on image for larger photo
|
Product Code:
FJ3T/140
FLOOR JACK 3 TON STEEL FRAME 140MM-460MM
LIFT WITH 120MM SWIVEL SADDLE HEAVYFRAME
LENGTH OF JACK 595MM WITH SWIVEL WHEELS
|
|
|
|
|
Please enter a valid quantity |
|
|
|
|
 |
|
|
|
3T Hydraulic Floor Jack 140-460mm Super Low Profile Dual Pump Car Trolley Lift
3T Hydraulic Floor Jack 140-460mm Super Low Profile Dual Pump Car Trolley Lift
Description
The hydraulic floor jack is constructed with heavy duty steel, providing long term quality and durability for both every day and industrial use. This floor jack has a 3 ton (6,600 lb) capacity and features a minimum lifting height of 140mm and a maximum height of 460mm, which is ideal for most cars, trucks, and SUVs. A safety bypass system prevents over-loading and ensures safe operation. Equipped with 2 large steel casters and 2 360-degree swivel casters for smooth maneuverability. The hydraulic garage jack features wide stance provides added stability under load and has a powder-coated finish for rust resistance.
Material: Steel
Color: Red
Load Capacity: 3 TON/ 6600 LBS
Min Height: 140mm
Max Height: 460mm
Saddle Diameter: 120mm
Product Size: 595 x 335x 225 mm
Handle Length: 565mm, 470mm
SAFETY PRECAUTIONS -
WARNING: FAILURE TO HEED THE FOLLOWING WARNINGS CAN RESULT IN PERSONAL INJURY AND/OR EQUIPMENT DAMAGE.THESE WARNINGS CANNOT COVER EVERY SITUATION, SO HAVE SAFETY FOREMOST IN YOUR MIND WHEN SETTING UP A JOB.
- READ, UNDERSTAND AND FOLLOW THE OPERATING INSTRUCTIONS AND THE ANSI B30.1 AND ASME PALD-1 SAFETY STANDARDS FOR JACKS. IF THE OPERATOR CANNOT READ ENGLISH, OPERATING INSTURCTIONS AND SAFETY PRECAUTIONS MUST BE READ AND DISCUSSED IN THE OPERATOR'S NATIVE LANGUAGE.
- WEAR EYE PROTECTION THAT MEETS THE REQUIREMENTS OF ANSI Z87.1 AND OSHA.
- INSPECT THE JACK BEFORE EACH USE; DO NOT USE THE JACK IF IT IS DAMAGED, ALTERED, OR IN POOR CONIDITION.
- TO PREVENT TIPPING, SET UP THE JACK ON A HARD, LEVEL SURFACE. SET VEHICLE PARKING BRAKE AND BLOCK TYRES.
- THE LOAD MUST NOT EXCEED THE RATED LIFTING CAPACITY OF THE JACK. LIFT ONLY DEAD WEIGHT.
- CENTER THE LOAD ON THE JACK SADDLE, BECAUSE OFF-CENTRE LOADS CAN DAMAGE SEALS AND CAUSE HYDRAULIC FAILURE.
- USE THE JACK FOR LIFTING PURPOSES ONLY. THIS JACK IS DESIGNED TO LIFT LOADS, NOT SUPPORT LOADS. IMMEDIATELY SUPPORT A LIFTED LOAD WITH JACK STANDS.
- STAY CLEAR OF LIFTED LOADS.
- USE ONLY APPROVED HYDRAULIC FLUID, SUCH AS CHEVRON AW HYDRAULIC OIL MV OR EQUIVALENT.
- THE JACK SHOULD BE USED ON HARD, LEVEL SURFACES
- THE WHEELS OF THE VEHICLE TO BE CHOCKED
- DO NOT PUT A PORTION OF YOUR BODY UNDER A VEHICLE SUPPORTED BY A JACK
- NO PERSON SHOULD REMAIN IN A VEHICLE THAT IS BEING JACKED
- DO NOT EXCEED THE WORKING LOAD LIMIT
OPERATING INSTRUCTIONS -
TO RAISE THE JACK, USE NARROW END OF JACK HANDLE TO TIGHTEN RELEASE VALVE CLOCKWISE (CW). INSERT HANDLE INTO SOCKET AND OPERATE PUMP. TO LOWER THE JACK, SLOWLY OPEN THE RELEASE VALVE KNOB BY TURNING IT COUNTERCLOCKWISE (CCW).
|
View Complete Range:
|
WORKSHOP TOOLS > JACKS - FLOOR - NORMAL
|
|
|
Video:
|
Images
|
|
|
.jpg&view=supp)
|
.jpg&view=supp)
|
|
Click to Enlarge |
Click to Enlarge |
.jpg&view=supp)
|
|
|
Click to Enlarge |
|
|
|
|
|
|
|
|
|