|
|
Enquiry
|
|
Click on image for larger photo
|
Product Code:
BA-3809-400-32-1.6
POWER HACKSAW BLADE 400MM X 32MM 14TPI
THIS BLADE FITS OLD STYLE 240 VOLT POWER
FLOOR HACKSAWS WITH 400MM BLADE
|
|
|
|
|
Please enter a valid quantity |
|
|
|
|
 |
|
|
|
PRODUCT DETAILS:
- SUITABLE FOR USE ON ANY MATERIAL
- SANDFLEX® IS VIRTUALLY AN UNBREAKABLE BI-METAL HACKSAW BLADE
- SHATTERPROOF BLADE THAT CAN WITHSTAND HIGH FEED PRESSURES YET GIVING ACCURATE, FAST CUTTING RATES
- SANDFLEX® BLADES ARE SAFER TO USE IN ALL CIRCUMSTANCES, ESPECIALLY ON OLD MACHINES OR WITH UNSKILLED OPERATORS
- CORRECT BLADE TENSION IS ESSENTIAL FOR ENSURING A STRAIGHT KERF AND A LONG USEFUL LIFE OF THE BLADE
- IF THE TENSION IS TOO LOW, THE BLADE WILL BEND UPWARDS OR TWIST, GIVING RISE TO HIGH STRESSES, HEAVY WEAR OF THE BLADE AND UNEVEN, CROOKED KERFS
- EXCESSIVE TENSION CAUSES HIGH STRESSES IN THE BLADE AND SAW FRAME
- AS A GENERAL RULE, HARDER MATERIALS CALL FOR A LOWER STROKE RATE AND HIGHER FEED PRESSURE
- IF THE CHIPS ARE BURNT, FEED PRESSURE IS TOO HIGH
- IF TOOTH CRACKS APPEAR, FEED PRESSURE IS TOO HIGH
- FINE, POWDERY CHIPS INDICATE THAT FEED PRESSURE IS TOO LOW
- FINE CURLED CHIPS INDICATE THE OPTIMAL FEED PRESSURE
- THE TEETH SHOULD NOT BE TOUCHING THE WORKPIECE WHEN THE MACHINE IS STARTED
- A USEFUL RULE OF THUMB IS THAT AT LEAST THREE TEETH SHOULD BE ENGAGED AT ANY TIME
|
View Complete Range:
|
ENGINEER HAND TOOLS > HACKSAWS AND BLADES
ENGINEER DRILL & CUT > BLADES - STEEL TO 400MM*
ENGINEER MACHINERY > BLADES - STEEL TO 400MM*
FENCING EQUIPMENT > BLADES - STEEL TO 400MM*
|
|
|
|
|
|
|
|
|