|
|
Enquiry
|
|
Click on image for larger photo
|
Product Code:
B2158
TRUCK JACK STAND 14968KG EACH CAP.
MIN :HEIGHT 1427. MAX: 2096MM. EXTRA
HEAVY WITH SWIVEL CASTER WIND UP SADDLE.
|
|
|
|
|
Please enter a valid quantity |
|
|
|
|
 |
|
|
|
TRUCK JACK STAND 2096MM-426MM 14968KG
33,000 LB TRUCK JACK STAND (15 TON)
EXTRA HEAVY DUTY TRUCK JACK STAND, FULLY WELDED WITH SPRING OPERATED SWIVEL CASTERS FOR EASY POSITIONING AND PORTABILITY.
SADDLE HAS A WIND UP THREAD AND THE REMOVABLE TUBE CAN BE SET AT ELEVEN DIFFERENT INTERVALS.
SAFETY PRECAUTIONS -
WARNING: FAILURE TO HEED THE FOLLOWING WARNINGS CAN RESULT IN PERSONAL INJURY AND/OR EQUIPMENT DAMAGE.THESE WARNINGS CANNOT COVER EVERY SITUATION, SO HAVE SAFETY FOREMOST IN YOUR MIND WHEN SETTING UP A JOB.
- READ, UNDERSTAND AND FOLLOW THE OPERATING INSTRUCTIONS AND THE ANSI B30.1 AND ASME PALD-1 SAFETY STANDARDS FOR JACKS. IF THE OPERATOR CANNOT READ ENGLISH, OPERATING INSTURCTIONS AND SAFETY PRECAUTIONS MUST BE READ AND DISCUSSED IN THE OPERATOR'S NATIVE LANGUAGE.
- WEAR EYE PROTECTION THAT MEETS THE REQUIREMENTS OF ANSI Z87.1 AND OSHA.
- INSPECT THE JACK BEFORE EACH USE; DO NOT USE THE JACK IF IT IS DAMAGED, ALTERED, OR IN POOR CONIDITION.
- TO PREVENT TIPPING, SET UP THE JACK ON A HARD, LEVEL SURFACE. SET VEHICLE PARKING BRAKE AND BLOCK TYRES.
- THE LOAD MUST NOT EXCEED THE RATED LIFTING CAPACITY OF THE JACK. LIFT ONLY DEAD WEIGHT.
- CENTER THE LOAD ON THE JACK SADDLE, BECAUSE OFF-CENTRE LOADS CAN DAMAGE SEALS AND CAUSE HYDRAULIC FAILURE.
- USE THE JACK FOR LIFTING PURPOSES ONLY. THIS JACK IS DESIGNED TO LIFT LOADS, NOT SUPPORT LOADS. IMMEDIATELY SUPPORT A LIFTED LOAD WITH JACK STANDS.
- STAY CLEAR OF LIFTED LOADS.
- USE ONLY APPROVED HYDRAULIC FLUID, SUCH AS CHEVRON AW HYDRAULIC OIL MV OR EQUIVALENT.
- THE JACK SHOULD BE USED ON HARD, LEVEL SURFACES
- THE WHEELS OF THE VEHICLE TO BE CHOCKED
- DO NOT PUT A PORTION OF YOUR BODY UNDER A VEHICLE SUPPORTED BY A JACK
- NO PERSON SHOULD REMAIN IN A VEHICLE THAT IS BEING JACKED
- DO NOT EXCEED THE WORKING LOAD LIMIT
OPERATING INSTRUCTIONS -
TO RAISE THE JACK, USE NARROW END OF JACK HANDLE TO TIGHTEN RELEASE VALVE CLOCKWISE (CW). INSERT HANDLE INTO SOCKET AND OPERATE PUMP. TO LOWER THE JACK, SLOWLY OPEN THE RELEASE VALVE KNOB BY TURNING IT COUNTERCLOCKWISE (CCW).
|
View Complete Range:
|
WORKSHOP EQUIPMENT > STANDS - TRUCK & DOZER*
TRACTOR-DOZER PARTS > STANDS - TRUCK & DOZER*
TRUCK & SEMI GEAR > STANDS - TRUCK & DOZER*
WORKSHOP EQUIPMENT > STANDS - UNDER HOIST*
TRUCK & SEMI GEAR > STANDS - UNDER HOIST*
WORKSHOP TOOLS > JACKS - UNDER HOIST*
WORKSHOP TOOLS > STANDS - UNDER HOIST*
WORKSHOP EQUIPMENT > JACKS - UNDER HOIST*
|
|
|
Video:
|
|
|
|
|
|