|
|
Enquiry
|
|
Click on image for larger photo
|
Product Code:
SS/0005
LANOLIN COAT STEEL/ TIMBER SEAL 5 LITRE
1 OR 2 COATS FOR A RUST FREE FINISH
CAN BE SPRAYED-BRUSHED OR ROLLED
|
|
|
|
|
Please enter a valid quantity |
|
|
|
|
 |
|
|
|
LANOTEC TIMBER SEAL IS A TIMBER SEALER FOR FURNITURE AND DECKING. SEASONED TIMBER AND DECKING PROTECTION. BIODEGRADABLE. LANOLIN BASED LANOTEC TIMBER SEAL PENETRATES, PRESERVES AND MAINTAINS THE NATURAL LOOK OF EXTERNAL DECKING, OUTDOOR FURNITURE, FENCING, GATES, CLADDING, DOORS, WINDOWS AND FURNITURE.
TIMBER SEAL CAN BE USED ON TIMBER PREVIOUSLY COATED WITH DECKING OIL. TIMBER MUST BE SHOWING SIGNS OF DRYNESS BEFORE APPLYING. IF THE TIMBER HAS TURNED GREY DUE TO WEATHERING, SAND SURGACE LIGHTLY AND CLEAN THOROUGHLY BEFORE APPLYING TIMBER SEAL. ADDITIONALLY AN OIL BASED STAIN CAN BE MIXED IN AT ABOUT 2% TO RESTORE COLOUR AND GIVE A UNIFORM LOOK (TEST ON INCONSPICUOUS AREA FIRST).
USES:
- TIMBER SEALER PENETRATES INTO TIMBER TO PREVENT DRYING, SPLITTING, CRACKING AND WOOD ROT
- WEATHERPROOFS EXTERNAL TIMBER SURFACES
- HIGHLIGHTS NATURAL WOOD TIMBER GRAIN AND FEATURES
- PROTECTS METAL FASTENING AND FITTINGS FROM CORROSION
- REPELS MOISTURE
APPLICATION:
SHAKE WELL BEFORE USE. REFER TO COVERAGE GUIDE AND DETERMINE COVERAGE AREA. ONLY USE THE RECOMMENDED VOLUME OF PRODUCT, AS OVERAPPLICATION CAN RESULT IN A TACKY FINISH. FOR DECKING SURFACES AND OTHER DRESSED TIMBER, TIMBER SEAL IS BEST APPLIED VIA SPRAY AND A FLAT LAMB'S WOOL APPLICATOR. FOR UNDERSIDE OF EXTERNAL DECKING AND FOR FENCING, APPLY BY SPRAY, PREFERABLY PRIOR TO CONSTRUCTION. APPLY COATS LIGHTLY AND SPARINGLY - LESS IS BETTER. THE FINAL COAT OF EXPOSED DRESSED TIMBER SURFACE CAN BE POLISHED/BUFFED TO THE NATURAL WAX TO REMOVE RESIDUE, MAXIMISE THE PROTECTIVE SEAL AND TO HIGHLIGHT THE NATURAL GRAINS.
DRYING TIME:
A MAXIMUM OF 6 HOURS BETWEEN COATS IS RECOMMENDED. DRYING TIME WILL VARY DEPENDING ON THE AMBIENT TEMPERATURE AND RELATIVE HUMIDITY.
REAPPLICATION:
A SIMPLE WATER TEST SHOULD BE CARRIED OUT TO DETERMINE PROTECTION LEVEL. POUR WATER ON TO TIMBER SURFACE. IF THE WATER BEADS, THE TIMBER IS PROTECTED. IF THE WATER IS ABSORBED, REAPPLICATION IS REQUIRED.
CLEANUP:
USE LANOTEC CITRA-FORCE OR MINERAL TURPS. FOR CLEANING DECKS USE WARM SOAPY WATER.
MAINTENANCE:
WHEN THE TIMBER BEGINS TO SHOW SIGNS OF DRYNESS OR LOST WATER REPELLANCY, IT IS TIME TO RECOAT. AS AN APPROXIMATE GUIDE FOR OUTDOOR ITEMS, A RECOAT IS RECOMMENDED AFTER 6 MONTHS, THEN ANNUALLY TYHEREAFTER. REAPPLICATION ON INDOOR SURFACES IS AS REQUIRED. NO PREP IS REQUIRED, SIMPLY ENSURE THE TIMBER IS CLEAN AND DRY AND APPLY STRAIGHT OVER THE EXISTING COAT.
NOTE:
IF THE TIMBER IS FRESHLY MILLED OR 'GREEN', ONLY APPLY INSIDE JOINTS AND ON BOLTS AND FASTENINGS. ALLOW TIMBER TO WEATHER FURTHER BEFORE APPLYING TIMBER SEAL. HIGH LEVELS OF TANNIN AND OILY RESINS OR HIGH MOISTURE CONTENT IN THE TIMBER WILL AFFECT THE PENETRATION RATE OF TIMBER SEAL WHICH CAN LEAD TO A POOR FINISH OF THE COATED SURFACE. IT IS IMPORTANT THAT THE TIMBER IS CLEAN AND DRY BEFORE APPLYING TIMBER SEAL.
|
View Complete Range:
|
PAINT PANEL & SPRAY > RUST INHIBITORS*
PAINT PANEL & SPRAY > LANOLENE TIMBER SEAL*
BUILDERS GEAR > LANOLENE TIMBER SEAL*
ENGINEER DRILL & CUT > RUST INHIBITORS*
OILS LUBES ADDITIVES > RUST INHIBITORS*
SANDBLAST & SODA EQU > RUST INHIBITORS*
TRACTOR-DOZER PARTS > RUST INHIBITORS*
W.SHOP CONSUMABLES > LANOLENE TIMBER SEAL*
WOODWORKING TOOLS > LANOLENE TIMBER SEAL*
|
|
|
Video:
|
|
|
|
|
|