|
|
Enquiry
|
|
Click on image for larger photo
|
Product Code:
MC105-0
ARC TIG WELDER 200 AMPS AC-DC & TIG AC &
TIG FOR ALUMINIUM 170 AMP STICK WELDER
HF PULSE START SUIT RODS 2 TO 4MM WIA
|
|
|
|
|
Please enter a valid quantity |
|
|
|
|
 |
|
|
|
WELDARC 200I KEY FEATURES:
- 200 AMP AC OR DC TIG
- AC TIG FOR ALUMINIUM
- 170 AMP STICK WELDER
- QUALITY 8 METRE TIG TORCH WITH IN-BUILT TRIGGER AND CURRENT CONTROL
- HF PULSE START OR LIFT ARC START
- PULSE TIG
- COMPACT, LIGHTWEIGHT DESIGN
- SUITS 2-4.0MM ELECTRODES
- 15 AMP SUPPLY PLUG
VRD
A BUILT IN VRD (VOLTAGE REDUCTION DEVICE) DELIVERS ADDED SAFETY WHEN OPERATING IN STICK OR LIFT-TIG MODE AND MEETS THE REQUIREMENTS OF SITE WORK. FULLY COMPLIANT TO AUSTRALIAN STANDARDS AS 60974.1 & AS1674.2 CAT C.
PORTABLE
AT 21KG, THE WELDARC 200I CAN GO WHEREVER THE JOB TAKES YOU, MAKING IT SUITABLE FOR ONSITE MAINTENANCE.
AC TIG
AC CAN BE USED SPECIFICALLY FOR TIG WELDING ALUMINIUM AND ALUMINIUM ALLOYS. THE BALANCE BETWEEN POSITIVE AND NEGATIVE CAN BE ADJUSTED TO CONTROL THE AMOUNT OF OXIDE CLEANING OR A MORE PENETRATING WELD. WHEN WELDING IN AC CURRENT HF PULSE START ALLOWS EASY ARC STARTING WHEN WELDING ALUMINIUM.
DC TIG
DC TIG CAN BE USED FOR ALL STEEL, STAINLESS STEEL, COPPER AND ALLOYS, TITANIUM. WHEN WELDING IN DC CURRENT HF PULSE START ALLOWS EASY NOT CONTACT STARTS FOR CRITICAL APPLICATIONS.
INTERGRATED GAS VALVE
HF PULSE START
HF PULSE IS A NON-CONTACT ARC STARTING METHOD ALLOWING EASY ARC START WITHOUT THE INTERFERENCE PROBLEMS WITH CONVENTIONAL HF AND ELIMINATES TUNGSTEN CONTAMINATION. AVAILABLE IN AC OR DC TIG MODE.
BUILT-IN OPERATOR SAFETY
THE POWER SOURCE FEATURES A BUILT-IN THERMAL PROTECTION DEVICE THAT WILL ACTIVATE IF THE MACHINE IS OPERATED BEYOND ITS SAFE THERMAL OPERATING ZONE.
HOT START FOR MANUAL ARC
BUILT-IN "HOT START" FEATURE IN STICK MODE FOR EVEN BETTER ARC STARTING.
ARC FORCE
BUILT IN "ARC FORCE", CONSTANTLY MONITORS ARC VOLTAGE AND WILL BOOST OUTPUT IF LOW ARC VOLTAGE OCCURS.
LIFT ARC TIG START
EASY TO USE LIFT ARC STARTING FOR TIG WELDING. ELIMINATES SCRATCH STARTING AND TUNGSTEN ELECTRODE DAMAGE.
GENERATOR COMPATIBLE
THE WELDARC 200I IS TOLERANT TO UNCONDITIONED POWER FROM GENERATORS. IT HAS BEEN OPTIMISED AND TESTED FOR COMPATIBILITY WITH APPROPRIATE PORTABLE GENERATORS.
APPLICATIONS:
- WELDING CONTRACTORS
- MINE MAINTENANCE
- SHIPYARDS
- RURAL WORKSHOPS
- MOTOR SPORTS FABRICATION
PROCESSES:
- TIG
- STICK
- LIFT ARC TIG
- HF PULSE START
SPECIFICATIONS:
PRIMARY VOLTAGE: 240 VAC - 50/60HZ
RATED PRIMARY CURRENT: 13 AMPS
MAXIMUM PRIMARY CURRENT: 34 AMPS
RECOMMENDED GENERATOR KVA: 10KVA
SUPPLY PLUG: 15 AMPS
RATED OUTPUT @ 40 DEGREES CELSIUS (10 MINUTES):
STICK MMA:
170 AMPS @ 26.8 VOLTS, 15% DUTY CYCLE
66 AMPS @ 22.6 VOLTS, 100% DUTY CYCLE
TIG:
200 AMPS @ 18 VOLTS, 15% DUTY CYCLE
77 AMPS @ 12.1 VOLTS, 100 DUTY CYCLE
WELDING CURRENT:
STICK MMA: 5 - 170 AMPS
TIG: 5 - 200 AMPS
DIMENSIONS- 770X340X460
WARRANTY: 2 YEARS
|
View Complete Range:
|
WELDING EQUIPMENT > WELDERS - AC/DC
|
|
|
|
|
|
|
|
|