|
|
Enquiry
|
|
Click on image for larger photo
|
Product Code:
40452
GULF WESTERN OIL BLACK MOLY TAK
PLEX MOLY GREASE 450 GRAM CARTRIDGE
HIGH IMPACT OR SLIDING SURFACE WEAR
|
|
|
|
|
Please enter a valid quantity |
|
|
|
|
 |
|
|
|
BLACK TAK OFFERS:
A LITHIUM COMPLEX GREASE, BLENDED FROM SELECTED BASE STOCKS INCORPORATING HIGH EXTREME PRESSURE, WATER RESISTANT ADDITIVES, OPTIMIZED MOLYBDENUM DISULPHIDE PLUS OXIDATION, CORROSION AND WEAR INHIBITORS SUPPORTED BY A HIGH LEVEL OF TACKINESS. IT PROVIDES LUBRICATING PROTECTION FOR OPERATIONS UP TO 200OC. ITS ABILITY TO PREVENT SCUFFING AND REDUCE WEAR UNDER HIGH LOAD AND SHOCK LOAD CONDITIONS, TOGETHER WITH ITS EXCELLENT RESISTANCE TO SHEAR AND HIGH TEMPERATURE OPERATION, MAKES IT PREFERRED OVER MULTI-PURPOSE GREASES. WITH EXTENDED SERVICE, IT MAINTAINS ITS ORIGINAL CONSISTENCY. IT WILL NOT THICKEN SINCE IT RESISTS OXIDATION. IT WILL NOT THIN OUT BECAUSE IT IS SHEAR RESISTANT. WATER RESISTANCE. WHERE WATER WASH OUT AND CONTAMINATING INFLUENCES CANNOT BE AVOIDED, EVEN AT ELEVATED TEMPERATURES, EFFECTIVE LUBRICATION IS MAINTAINED BECAUSE OF THE EXCELLENT WATER RESISTANCE OF THE COMPLEX BASE. IN THESE SITUATIONS IT ALSO GIVES PROTECTION AGAINST RUSTING AND CORROSION. ADHESIVE AND COHESIVE. IT INCORPORATES A VERY HIGH LEVEL OF TACKINESS IN ORDER TO RESIST "SQUEEZE OUT" FROM SURFACES REQUIRING LUBRICATION UNDER LOAD CONDITIONS OR WHERE THERE IS EXCESSIVE CLEARANCES IN PINS AND BUSHES. EVEN THE BEST GREASE CAN NOT PROVIDE PROTECTION IF IT IS UNABLE TO REMAIN IN SITU.
RECOMMENDATIONS:
GULF WESTERN BLACK TAK IS DESIGNED PRIMARILY FOR USE IN THE MINING INDUSTRY WHERE IT IS RECOMMENDED FOR THE LUBRICATION OF SLOW MOVING PLAIN AND ROLLER BEARINGS UNDER HIGH LOAD. IT ALSO PROVIDES EXTRAORDINARY PERFORMANCE FOR EARTHMOVING PLANT WHERE LONG LUBRICATION INTERVALS, WATER, DUST AND VIBRATION PROTECTION IS REQUIRED OR WHERE HIGH IMPACT OR SLIDING SURFACE WEAR IS A PROBLEM.
BLACK TAK MEETS THE FOLLOWING INTERNATIONAL PERFORMANCE SPECIFICATIONS:
- NLGI GRADE: 2
- SOAP TYPE: LITHIUM COMPLEX
- COLOUR: BLACK / GREY
- TEXTURE: SMOOTH, VERY TACKY
- PENETRATION AT 25OC:
- WORKED, D.217 265-275
- WORKED, 100,000 STROKES, CHANGE % D.217 +10
- DROPPING POINT, OC D.2265 260+
- WATER WASHOUT AT 80OC, % D.1264 3.5
- OIL SEPARATION 24 HOURS AT 25OC KPA D.1742 4-5
- OXIDATION STABILITY:
- PRESSURE DROP AT 100 HOUR, KPA D.942 30-40
|
View Complete Range:
|
OILS LUBES ADDITIVES > MARINE GREASES & OILS
OILS LUBES ADDITIVES > GREASE CARTRIDGES*
FUEL LUBE/GREASE GEAR > GREASE CARTRIDGES*
TRUCK & UTE ACCESS. > BEARING GREASE - TRUCKS*
OILS LUBES ADDITIVES > BEARING GREASE - TRUCKS*
TRACTOR-DOZER PARTS > BEARING GREASE - TRUCKS*
|
|
|
|
|
|
|
|
|