TOOLKIT METRIC AF 198 PCE APPRENTICE
1/4" DRIVE SOCKETS & ACCESSORIES
- 7 METRIC SOCKETS: STANDARD: 4, 5, 6, 7, 8, 9, 10MM
- 7 AF SOCKETS: STANDARD: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8"
- SOCKET DRIVER, 150MM
3/8" DRIVE SOCKETS & ACCESSORIES
- 8 METRIC SOCKETS: STANDARD: 10, 11, 12, 13, 14, 15, 17, 19MM
- 7 AF SOCKETS: STANDARD: 3/8, 7/16, 1?2, 9/16, 5/8, 11/16, 3/4"
- SPARK PLUG: 5/8 & 13/16"
- RATCHET, REVERSIBLE, 195MM
- EXTENSION, 75MM
- EXTENSION, 150MM
- ADJUSTABLE OFFSET HANDLE, 220MM
- UNIVERSAL JOINT
- ADAPTOR 3/8" FEMALE TO 1/4" MALE
1/2" DRIVE SOCKETS & ACCESSORIESS
- 19 METRIC SOCKETS: STANDARD: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32MM
- 15 AF SOCKETS: STANDARD: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"
- SPARK PLUG: 5/8 & 13/16"
- RATCHET, REVERSIBLE, 250MM
- EXTENSION, 130MM
- EXTENSION, 250MM
- ADJUSTABLE OFFSET HANDLE, 375MM
- UNIVERSAL JOINT, BALL TYPE
RING & OPEN END SPANNERS
- 10 METRIC SPANNERS: 8, 10, 11, 12, 13, 14, 16, 17, 18, 19MM
- 10 AF SPANNERS: 1?4, 5/16, 3/8, 7/16, 1?2, 9/16, 5/8, 11/16, 3?4, 15/16"
RING SPANNERS
- 7 METRIC SPANNERS: 6 X 7, 8 X 9, 10 X 11, 12 X 13, 14 X 15, 16 X 17, 18 X 19MM
- 6 AF SPANNERS1/4 X 5/16, 3/8 X 7/16, 1/2 X 9/16, 9/16 X 5/8, 11/16 X 3/4, 13/16 X 7/8"
FLARE NUT SPANNERS
- 5 METRIC SPANNERS: 10 X 11, 12 X 13, 13 X 14, 15 X 17, 19 X 22MM
- 4 AF SPANNERS: 3/8 X 7/16, 1/2 X 9/16, 5/8 X 11/16, 3/4 X 7/8"
SCREWDRIVERS
- PHILLIPS TIP: 75MM X #0, 75MM X #1, 40MM X #2, 100MM X #2, 150MM X #3
- STANDARD TIP: 75 X 3.2MM, 100 X 4.75MM, 40 X 6.35MM, 100 X 6.35MM, 150 X 7.9MM
- T-HANDLE RATCHET SCREWDRIVER SET PHILLIPS®: 1, 2, 3, POZIDRIVE®: 1, 2, 3, SLOTTED: 4, 5.5, 6, HEX HEAD: 3, 4, 5, TORX®: 10, 15, 20, 25, 27, 1/4?X50MM & 100MM LONG KNURLED SHAFT, 1/4" HEX - 1/4" SQUARE DRIVE ADAPTOR
HEX KEYS - LONG BALL POINT
- 9 METRIC HEX KEYS: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10MM
- 9 AF HEX KEYS5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"
PUNCHES & COLD CHISELS
- 4 CENTRE PUNCHES: 3, 4, 5, 6.5MM
- 4 LONG PIN PUNCHES: 3, 4, 5, 6MM
- 2 STARTER DRIFT PUNCHES: 3 & 5MM
- 3 COLD CHISELS: 12, 19, 25MM
ADJUSTABLE WRENCH 150, 300MM
PLIERS
- MULTIGRIPS: 250MM
- COMBINATION PLIERS: 200MM
- DIAGONAL CUTTING PLIERS: 200MM
- LONG NOSE PLIERS: 200MM
- SNAP RING PLIERS: INTERNAL STRAIGHT, EXTERNAL STRAIGHT
- LOCKING: 240MM
- ANTI-VIBE BALL PEIN HAMMER: 450GRAMS
- HACKSAW 300MM
- MECHANIC FEELER GAUGE
- 6-12V DC CIRCUIT TESTER
- TAPE: 8 METRE
- HEAVY DUTY SCISSORS
- 8 DRAWER HEAVY DUTY TOOL CHEST
- WIDTH: 660MM X DEPTH: 305MM X HEIGHT: 433MM
|